3FE Engine Conversion Kit - Used

3FE Engine Conversion Kit - Used 1958-1992
OCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> Now offering a complete bolt in solution for your problem plagued carbureted engine. Say goodbye to hard starting, rough running, low power and stay all genuine Toyota to preserve the retail value of your Landcruiser.

This kit fits all 1958-1992 Toyota Landcruisers that originally had a F, 2F or 3F carbureted engine.

A Toyota Landcruiser 3F-EFI gasoline engine conversion. Complete kit only $5000- / The engine used is removed from a 1988-1990 Toyota Landcruiser. After we get a placed order we pull the engine, get compression information and mileage for you. Engines used for the conversion kit are typically in the 100k-150k mileage range. Takes roughly 2-6 weeks from the date of your order before it ships.

A rebuilt engine adds $3,900 to the total price and 6-8 weeks to the total delivery time. Rebuilt engines are a rebuilt long block, not the external accesories. New/Rebuilt external accesories can also be supplied for additional money. Please plan accordingly.

A brand new engine adds $7,500 to the total price. A NEW engine is as the below stock picture:



Includes the following:

• 1988-1990 Toyota 3F-EFI engine assembly / Installs in place of original F, 2F or 3F / This is a USED (Not cleaned) engine.
• Computer / Install inside or below glove box.
• Mass air flow sensor with air filter adapter
• Custom wiring harness / Lays out inside engine compartment. Requires some taps into existing electrical system.
• Used original Toyota Main Relay
• Used original Toyota Circuit Opening Relay
• Gas pedal and throttle linkage. Must custom mount to 40 series firewall. Direct bolt in on 60 series.
• Fuel Pump Inline Style / Mounts between battery tray and the charcoal canister. Or along frame rail.
• Coil/Igniter / Mounts in place of factory coil/igniter on passengers fender.
• Air intake Hose set, you can use in a few different configurations.
• FJ62 ABV Valve / VSV Unit / Mounts directly on drivers side fender in existing bolt holes.
• Down Pipe Set with O2 sensors / Exhaust shop can fabricate from these. These are included for flanges only.

Emission control components can remain hooked up and this is a 50 state smog legal engine.

Your original transmission clutch and bellhousing will bolt directly to this engine.

The engine mounts will bolt in directly. No welding or cutting!

Some stuff we can leave installed and you can hook up when you bolt it in.

Power steering Pump = $100
Air Conditiong Compressor = $100

E-mail tech support included. Please allow 2-3 days before a response. We DO NOT offer technical support via phone. There are no instructions included.

Call us: 888-941-3450
Or email us any other questions.