Advanced Search

1982 Toyota Landcruiser BJ41 1982 Toyota Landcruiser BJ41 Asking Price is only $15,900 or best offer. Landcruisers & or parts as partial trade towards this truck also accepted! Please call us...

Cylinder head bolt for 1FZFE, 1993-1997. 14 required. Price shown is for a new genuine Toyota part. (Used, refinished, rebuilt/remanufactured, and aftermarket options may also be available. If so,...

ENGINE VALVE GRIND gasket set for 1993-1997 Land cruiser and Lexus LX450. All the gaskets and seals you need! Japanese brand kit. High quality. Made by ISHINO corporation. Genuine Toyota also...

Land Cruiser 1FZFE Cylinder heads. We have many options to choose from. Starting with a used cylinder head. Used take off. Bare head, no valves or cams. LandCruiser 1FZ cylinder heads have various...

Rebuilt 1FZ-FE Engine. 1993-1997. Fully rebuilt, 1FZFE New pistons, rings, bearings, oil pump, Gaskets, Seals, Head remanufactured. We have this remanufactured 1FZFE engine available to ship in...

Cylinder head bolt for 1PZ 1HZ, 1HD-T, 26 required. Price shown is for a new genuine Toyota part. (Used, refinished, rebuilt/remanufactured, and aftermarket options may also be available. If so,...

This is a Used Cylinder Head for an 2F Style Engine. This has been inspected for cracks and warps and is in good condition. Please note: Used parts naturally vary in condition and appearance. The...

Please note: Used parts naturally vary in condition and appearance. The photo shown, while representative, is not necessarily a photo of the actual item you will receive. All Used Parts have a 90...

This starts as a nice used head that depending on the service you want done or not done could bring it from cleaned, to resurfaced, to Valve and Seal Job done on it. We often stock these in...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

Rebuilt 2F 6 cylinder engine. Can be used in Land Cruisers from 1975-1987. New Pistons New Rings New Timing Components New Freeze Plugs New Installer Gasket Set  New Main Bearings New...

This 2F Engine Cylinder Head Gasket Kit is listed for the 8/80-8/87 60 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be glad...

Valve cover (a.k.a. cylinder head cover) for FJ40/45/60, 08/1980-08/1987, with 2F engine. Price shown is for a used genuine Toyota part. (New, refinished, rebuilt/remanufactured, and aftermarket...

18 Cylinder head bolts are required for the 3B and 2H engines. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are...

Well here it is, a brand new 2H head. Reuse your existing valves and internals. Head only. Not as pictured loaded. This is an unloaded head. Land Cruiser diesel. 1985-1990 2H engines. Price shown is...

26 Cylinder head bolts are required. Sold each

Cylinder head gasket 3B Engine. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are looking for. Feel free to call...

3FE cylinder head that is magnafluxed. For an additional $150 the head is cleaned, magnafluxed, pressure tested and checked for cracks and resurfaced. We offer regrinding of the valves, seats,...

Needs regrind, resurface and valve job. Casting is in good shape. No cracks. Please note: Used parts naturally vary in condition and appearance. The photo shown, while representative, is not...

This 3F Engine Cylinder Head Gasket Kit is listed for the FJ62 & FJ80 3FE engines. Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we...

Rebuilt 3F 6 cylinder engine. For 1988-1992 Toyota Land Cruisers. New Pistons New Rings New Timing Components New Freeze Plugs New Installation Gasket Set New Main Bearings New Rod Bearings ...

Description Advance Adapter   This custom flex plate kit is designed to adapt the Gen III / LS series to the GM TH350, and 700R4 transmissions. The kit includes a flexplate, 11mm flex plate...

Description Advance Adapter   This custom flex plate kit is designed to adapt the Gen III / LS series to the GM TH350, and 700R4 transmissions. The kit includes a flexplate, 11mm flex plate...

Description Advance Adapter   This custom flex plate kit is designed to adapt the Gen III / LS series to the GM TH400 transmissions. The kit includes a flexplate, 11mm flex plate bolts,...

Description This adapter plate will adapt a NP435 4 speed directly to the original Jeep AX4 or AX5 bell housing. The input shaft must be 7-1/2" stick out from the face of the transmission. The...

Description Advance Adapter This kit is designed for the GM blocks with a 153T flywheel.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1984-95 Toyota Truck 5...

Description Advance Adapter This kit is designed for the GM blocks with a 168t flywheel or a newer Gen 3 engine.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the...

Description Advance Adapter This kit is designe to fit the GM block with a 153T flywheel   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1986-95 Toyota Truck 5...

Description Advance Adapter This kit fits GM blocks with a 168T flywheel and Gen 3 engines   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1986-95 Toyota Truck 5...

Description Advance Adapter This kit is designed to work with the GM 153T flywheel.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep AX5, 5 speed manual...

Description Advance Adapter This kit is designed to work with the GM 168T flywheel and Gen 3 engines   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep AX5, 5...

Description Advance Adapter This kit is designed to fit the GM block with a 153T flywheel.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep AX15, 5 speed manual...

Description Advance Adapter This kit is designed to fit the GM block with a 168T flywheel and the Gen 3 engines.  This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the...

Description Advance Adapter This kit is designed to fit the GM 153T flywheel.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep NV3550, 5 speed manual...

Description Advance Adapter This kit is designed to fit the GM 168T flywheel and the Gen 3 engines.   This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep NV3550, 5...

About the Product: ARB's new CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the market need for a compact sized yet high-volume compressed air source to suit the high volume...

DESIGN & DEVELOPMENT: ARB’s new CKMTP12 twin portable air compressor was designed to fill the market need for a compact sized yet high performance compressed air source for rapid inflation of...

Toyota 8" 4 Cylinder Differential For use with 1-1/2" Pinion Head Bearing & Seal Kit Differential: Toyota 8" with 4 cyl gears 1-1/2" Pinion head thickness (Std Rotation) Kit...

Toyota 8" 4 Cylinder Differential For use with 1-5/8" Pinion Head Bearing & Seal Kit Differential: Toyota 8" with 1-5/8" Pinion head thickness (Std Rotation) Kit Assembly...

Long, equal length primary pipes deliver the maximum in torque, power, and fuel economy. Flat faced flanges designed to use OEM Toyota manifold gaskets, eliminate exhaust leaks at the cylinder head,...

This is a New Genuine Toyota Combustion Chamber Sub Assembly for the 3B Cylinder Head. Price shown is for a New or Remanufactured Genuine Toyota part. All Remanufactured and New Genuine Toyota Parts...

This Cylinder Head is listed for the 1984 to 1990 62 and 80 Series Land Cruisers. This Cylinder Head fits 3F Engines. If you have any questions about the item(s) that you may need please feel free to...

Brand New Genuine Toyota 24V Turbo cylinder head. Aftermarket reproduction also available.

Brand New Genuine Toyota 12V Turbo cylinder head.

Brand New Genuine Toyota cylinder head for 1HZ engines. Interchange Numbers: 11101-17010 11101-17011 11101-17012 11101-17013 11101-17050 Price shown is for a New or Remanufactured Genuine Toyota...

Cylinder head for Land Cruiser & LX470 with 2UZ engines 1998-2002. Price shown is for a Used original Toyota part. (Used, refinished, rebuilt/remanufactured, and aftermarket options may also be...

Cylinder head Right side for Land Cruiser & LX470 with 2UZ engines 1998-2002. Price shown is for a Used original Toyota part. (Used, refinished, rebuilt/remanufactured, and aftermarket options may...

3B cylinder head. 07-1988 and later. Exterior bolt down cylinder head cover type. 3BII, 3B 2, 2nd generation 3B type engines. Price shown is for a New part. Cast overseas and machined in the USA. All...

Got a rare 3B in your cruiser and just cracked your head? Can't find one used? Here is a new head! The head is sold bare (precombustion chambers, freeze plugs & valve seats, stems are preinstalled!)...

Cylinder head for Land Cruiser LJ72/79 and LJ90/95, Hilux LN-series, Hiace LH1xx-series, Dyna LY211 and LY61, with 3L engine. Price shown is for a new genuine Toyota part. (Used, refinished,...

Got a rare B, 2B or early type 3B (Smaller valve style 3B engines only) in your cruiser and just cracked your head? Can't find one used? Here is a new one with precombustion chambers installed! The...

This Bolt is listed for F, 2F, 3F and 3FE Engines found in various year frames of Toyota Land Cruisers. New Part Options are available. If you have any questions about the item(s) that you may need...

This Cylinder Head Cover Bolt is listed for various year frames of the Toyota Corolla and Celica. If you have any questions about the item(s) that you may need please feel free to call and we will be...

This Bolt Is Listed for 01-06 70 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are looking...

This Cylinder Head Cover Bolt is listed for the 8/92-12/97 80 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help...

This Cylinder Head Cover is listed for various Toyota Land Cruisers equipped with the 2H Engines. If you have any questions about the item(s) that you may need please feel free to call and we will be...

This gasket is listed for 90-92 70 Series, 87-90 62 Series and 90-92 80 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be...

This Cylinder Head Cover Gasket is listed for the Lexus LX470 and various other Lexus vehicles and models. If you have any questions about the item(s) that you may need please feel free to call and...

This Cylinder Head Gasket is listed for '90-'00 70 Series and '90-'98 80 Series Land Cruisers. Aftermarket Options Available. If you have any questions about the item(s) that you may need please feel...

This Cylinder Head Gasket is listed for the 1987 to 1992 62 and 80 Series Land Cruisers. Also, this Cylinder Head Gasket fits 3F Engines. If you have any questions about the item(s) that you may need...

This Gasket is listed for '90-'96 70 Series Land Cruisers, Toyota Dyna, Hiace and Hilux. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to...

This gasket is listed for various year frames of the Non-US Toyota Dyna Toyoace and Coaster. If you have any questions about the item(s) that you may need please feel free to call and we will be...

Cylinder head gasket for 1HZ engine. Price shown is for a quality aftermarket part. (New, used, refinished, and rebuilt/remanufactured options may also be available. If so, select below.) Tag:...

Cylinder Head Gasket B, 2B, 11B Interchange numbers: 11115-56120, 11115-56100, 11115-56080, 11115-56090, 11115-56010, 11115-56011, 11115-56020, 11115-56021

This Cylinder Head Gasket is listed for the B, 2B and 11B Toyota Engines. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find...

Cylinder head valve regrind gasket kit for early through 1967 Siamese Port Engine. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help...

Listed for Toyota Land Cruisers equipped with a 2LT engine. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are...

This Cylinder Head Cover Gasket is listed for 8/92-12/97 80 Series Land Cruiser and LX450. 1FZ-FE engines. Valve Cover Gasket. If you have any questions about the item(s) that you may need please...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

Nice used head that has been cleaned and resurfaced, also checked for cracks. We offer regrinding of the valves, seats, springs, and seals installed for additional $250, ready to bolt on and go. We...

This is a Used Cylinder Head for an F Style Engine. This has been inspected for cracks and warps and is in good condition.

Toyota Land Cruiser Front Disk Brake Conversion Kit Please read what is needed to convert your: July 1970 through 1990 FJ40, FJ45, FJ55, FJ60 or FJ62 to front disk brakes. We sell this $450 base kit...

** TOYOTA 2L/ 3L Fuel Injector HOLDER & NOZZLE 2.4 LITRE Single Overhead Cam to fit 2L , 2.4 LITRE, 80hp 4 CYLINDER ENGINES 093500-4042 23600-54080 093100-4042 093400-5640 NOZZLE STAMPING NUMBER:...

This is an OEM fuel pipe that goes from the fuel rail around to the cylinder head. Fits FJ62's from 1988 to 1992 Used only. New no longer available.

Intake/exhaust manifold-to-cylinder-head attachment kit for 1975-1987 models. Kit Contains 4x 90119-12003 2x 90119-10315 2x 90116-12011 2x 90201-12051 2x 90170-12211 Hardware finish may vary. All...

Intake/exhaust manifold-to-cylinder-head attachment kit for early through 1974 models. Kit Contains: 6x 90116-10042 6x 90170-10199 6x 90201-10283 Hardware finish may vary. All parts are new, genuine...

This Cylinder Head Cover NO.2 is listed for Lexus LX450. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are...

This gasket is listed for 76-80 40/55 Series Land Cruisers equipped with a '2F' Engine. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to...

This gasket is listed for non-us Early-74 40 series Land Cruisers equipped with a 'F' engine. If you have any questions about the item(s) that you may need please feel free to call and we will be...

Manifold to cylinder head gasket for 3FE engine, 08/1997-08/1992. Price shown is for a quality aftermarket part. (New, used, refinished, and rebuilt/remanufactured options may also be available. If...

This Stud is listed for 85-87 60 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are...

Toyota 8" 4 Cylinder Differential For use with 1-1/2" Pinion Head Master Gear Installation Kit Differential: Toyota 8" with 4 cyl gears 1-1/2" Pinion head thickness (Std...

Toyota 8" 4 Cylinder Differential For use with 1-5/8" Pinion Head Master Gear Installation Kit Differential: Toyota 8" with 1-5/8" Pinion head thickness (Std Rotation) Kit...

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Helvetica; min-height: 14.0px} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; text-align: center; font: 16.0px Arial; -webkit-text-stroke: #000000} p.p3...

Toyota 8" 4 Cylinder Differential For use with 1-1/2" Pinion Head Pinion Gear Installation Kit Differential: Toyota 8" with 4 cyl gears 1-1/2" Pinion head thickness (Std...

Toyota 8" 4 Cylinder Differential For use with 1-5/8" Pinion Head Pinion Gear Installation Kit Differential: Toyota 8" with 1-5/8" Pinion head thickness (Std Rotation) Kit...

Plate washer for various models. Usually used for cylinder heads on US Land Cruisers and trucks, but used for other purposes on other US and international models, e.g. 4Runner, Tacoma, T100, etc....

This Washer is listed for 74-80 40 Series Land Cruisers. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you are...

Semicircular plug for cylinder head on 1PZ, 1HZ, 1HDTFE, L, 2L, and 2LT engines. Fits HZJ/HDJ/PZJ7x-series Land Cruiser. Also fits 4Runner and Pickup with L/2L2LT engines. If you have any questions...

Valve cover (cylinder head cover) for 1HZ & 1HD-T 12 Valve engines.< If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what...

Cylinder head valve cover gasket for 40- and 60-series vehicles. If you have any questions about the item(s) that you may need please feel free to call and we will be glad to help you find what you...