Slee Off Road : CruiserParts, Toyota Landcruiser Parts Land Cruiser Parts

00-07 UZJ100 - 6 Piece Line Kit - Compatible with VSC Models

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$198.00

Add:

STF1017
Slee Off Road

03-09 4Runner - 4 Piece Line Kit Front Frame to Caliper

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modification

$154.00

Add:

W61699A
Slee Off Road

1990-2007 Rear Upper Control Arm Bushing Kit

1990-2007 Rear Upper Control Arm Bushing Kit These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. Whether you have shot...

$126.50

Add:

LIG1002
Slee Off Road

1991-1997 Slee Auxiliary Light Harness

To facilitate easy installation of auxiliary lights we now offer a plug and play harness. This harness was designed to work with the FZJ80 lighting system. Configuration 1 In this setup, the harness...

$49.49

Add:

STF1014
Slee Off Road

1995 and on Tacoma 1.25" - 6 on 5.5" Wheel Spacers Hub Centric

This set of Wheel Spacers fits All Land Cruisers up to 1997 and All Toyota Pick-Ups and 4Runners up to 1995. Wheel spacers allow you to space the wheels out without purchasing different wheels. They...

$108.90

Add:

SOF1038
Slee Off Road

2" Receiver Hitch for FJ40, FJ55 and 80 series early-97

This receiver bolts directly to the existing holes in the rear cross member of the 1991-97 Toyota Land Cruiser 80 series. Also Fits All FJ55 and FJ40 models without a rear step. It allows for the use...

$169.90

Add:

NPTC-1131
Slee Off Road

80 and 100 Series 3:1 Low Range Gears

These Low Range Gears provide a 25% Reduction over stock gearing for the 80 and 100 Series.

$603.90

Add:

STF1013
Slee Off Road

91-92 FJ80 - 2 Piece Frame to Axle Kit (+4")

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$82.50

Add:

STF1023
Slee Off Road

91-92 FJ80 - 2 Piece Front Axle to Caliper Kit

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$77.00

Add:

STF1058
Slee Off Road

91-97 Aftermarket U Joints

Double Cardan Replacement U-Joint Requires two per double cardan joint

$66.00

Add:

STF1059
Slee Off Road

91-97 Aftermarket U Joints

Replacement U-Joint - 1991-97 Land Cruiser Factory Front Shaft Requires two per shaft

$44.00

Add:

STF1067
Slee Off Road

91-97 Aftermarket U Joints

Replacement U-Joint - 91-97 Land Cruiser Factory Rear Shaft Requires two per shaft

$55.00

Add:

SOF1084 / W81428A
Slee Off Road

91-97 Front Control Arm Axle Side Bushing Kit 80 Series

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$115.50

Add:

SPC-88915
Slee Off Road

91-97 Land Cruiser Camber Bearings - 1 Degree

Front Adjustment Range: Cam/Cas 1° Required: 1 kit per wheel These offset bearing kits provide 1° of camber and/or caster change for the Toyota Land Cruiser / Lexus LX450's.

$121.00

Add:

SPC-88920
Slee Off Road

91-97 Land Cruiser Camber Bearings - 3 Degree

Front Adjustment Range: Cam/Cas 3° Required: 1 kit per wheel These offset bearing kits provide 3° of camber and/or caster change for the Toyota Land Cruiser / Lexus LX450's.

$132.00

Add:

STF1073
Slee Off Road

91-97 Land Cruiser Knuckle Rebuild Kit w/Marlin Seals

Includes: 4 Trunion Knuckle Bearings 2 Upgraded Marlin Inner Axle Seals 2 Inner Wheel bearing hub seals 2 Hub gaskets 2 Dust seals 2 Spindle lock washers 2 Dust seal gaskets 2 Spindle gaskets 2 Felt...

$187.00

... more info

STF1008
Slee Off Road

93-97 FJ80 - 3 Piece Frame to Axle Brake Line Kit Kit (+4")

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$108.90

Add:

STF1021
Slee Off Road

93-97 FJ80 - 4 Piece Axle to Caliper Kit

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$152.90

Add:

SOK1001
Slee Off Road

93-97 FJ80 and LX450 Windshield Washer Relocation Kit-Stainless

If you are planning to install a dual battery system in a 1993-97 Land Cruiser, you can use a battery tray from a 1991-92. The battery location was on the passenger side. This battery tray will fit...

$67.99

Add:

STF1018
Slee Off Road

96-02 4Runner - 3 Piece Line Kit Front Frame to Caliper

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$108.90

Add:

STF1019
Slee Off Road

96-04 Tacoma - 3 Piece Line Kit Front Frame To Caliper

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modification

$108.90

Add:

STF1078 or Black
Slee Off Road

98-07 UZJ100 1.25" - 5 on 150mm Wheel Spacers - Full Float Front

This Custom Spidertrax Pair of Wheel Spacers comes with the Lug Nuts necessary to add them on to your UZJ100. The aftermarket option below is 1" thick. The secondary option spacers which are cheaper...

$203.49

... more info

STF1079
Slee Off Road

98-07 UZJ100 1.25" - 5 on 150mm Wheel Spacers for Full Float

This Pair of Wheel Spacers comes with the Lug Nuts necessary to add them on to your UZJ100. This Pair of Wheel Spacers is for the following vehicles: 1998 - 07 Land Cruiser Rear Only 2007 - Current...

$163.90

Add:

SOK0019
Slee Off Road

98-07 UZJ100 Group 31 Battery Upgrade Tray With Bracket

The Slee Primary Upgrade Battery Tray for the 1998-07 Land Cruiser / LX470 replaces the existing factory battery tray and bracket. This is a direct bolt in upgrade using a Interstate 31P-AGM7...

$137.49

Add:

STF1088
Slee Off Road

98-99 UZJ100 - 5 Piece Line Kit

DOT approved direct replacement stainless steel brake lines complete with clips and washers. These lines will fit the factory brackets without any modifications.

$170.50

Add:

STF1056
Slee Off Road

Aftermarket Toyota Style Light Switch 200 Series

Toyota OE Switch that fits the newer style dash knock-outs. 200 Series Style. Supplied with the plug and wiring pigtail.

$38.49

Add:

STF1012 WHS005
Slee Off Road

All Land Cruisers Up to 1997 1.5" - 6 on 5.5" Wheel Spacers

This set of Wheel Spacers fits All Land Cruisers up to 1997 and All Toyota Pick-Ups and 4Runners up to 1995. Wheel spacers allow you to space the wheels out without purchasing different wheels. They...

$179.00

Add:

STF1042
Slee Off Road

FJ80 Aftermarket Birfield Joint

These replacement Birfields are intended for vehicles with smaller tire size(s) and or driven more on-road. Due to the hardness factor, they wear better, but do not provide the same protection...

$247.50

Add:

SPC-25465
Slee Off Road

IFS 2008-Current Land Cruiser Upper Control Arms (Pair)

Many Toyota trucks and SUV's run out of factory adjustment when you install a lift. These upper control arms provide an additional +/- 2 degrees of camber and 0 degree to + 4 degree of caster change....

$686.40

Add:

SOF1225
Slee Off Road

Part Time Kit With Freewheel Hubs - 100 Series Land Cruiser

1998-07 Land Cruisers Installing this kit allows you to run your 1991-07 80 or 100 Series Land Cruiser in part time 4wd. On the 1993-97 vehicles the viscous coupler is removed. The 80 Series Land...

$946.00

Add:

SOF1224
Slee Off Road

Part Time Kit With Freewheel Hubs - 80 Series Land Cruiser

1991-97 Toyota Land Cruisers Requires Center Diff Lock Switch Installing this kit allows you to run your 1991-07 80 or 100 Series Land Cruiser in part time 4wd. On the 1993-97 vehicles the viscous...

$658.90

Add:

SOF108? / W81697
Slee Off Road

Slee 91-97 Front Control Arm Frame Side Bushing Kit

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$76.96

Add:

SPC-25470
Slee Off Road

Slee 05-13 Tacoma Upper Control Arms (Pair)

$522.50

Add:

SOF1108
Slee Off Road

Slee 07-13 FJ Cruiser Heavy Duty Rear Lower Control Arms

These are direct replacement soild heavy duty rear control arms. These units are made from 27.4mm solid K1045 metal. They are treated with a Zinc Dichromate for corrosion resistance. The arms are...

$324.50

Add:

STF1037 SOK1037
Slee Off Road

Slee 54mm Spindle Bushing Grease Tool

Grease Toyota spindle bushings without the removal of the spindle or the wheel hub. Just remove the drive flange, locking hub and one hub nut. The tool will then screw onto spindle and grease will...

$60.49

Add:

SOF1094
Slee Off Road

Slee 80 Series Front Control Arms With or Without Bushings

The Slee front control arms machined from a solid 1.75" plate. The bushing eyes are machined to accept standard Toyota oem bushings, or aftermarket urethane bushings. The arms are designed to yield...

$951.50

Add:

LIG1004
Slee Off Road

Slee 9005 Hi-Beam Jumper Harness

If you do not wish to install the 9005/9006 Upgrade Harness, but still wishes to use the Auxiliary Light Harness you can purchase the 9005 or 9006 Jumper harness to allow direct plug in to the oem...

$9.90

Add:

LIG1003
Slee Off Road

Slee 9006 Low Beam Jumper Harness

If you do not wish to install the 9005/9006 Upgrade Harness, but still wishes to use the Auxiliary Light Harness you can purchase the 9005 or 9006 Jumper harness to allow direct plug in to the oem...

$9.90

Add:

SOF1078
Slee Off Road

Slee 91-07 Land Cruiser Adjustable Rear Upper Control Arms

The rear upper control arms forms part of the rear 4 link suspension. When the rear suspension is lifted, the axle will rotate backwards thus forcing the differential pinion to point upwards. The...

$412.50

Add:

SOF1254 / W63440
Slee Off Road

Slee 91-07 Rear Lower Control Arm Hi-Flex Design Bushing Kit

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$141.90

Add:

SOF1098
Slee Off Road

Slee 91-92 Front Swaybar Bushings Kit - 21mm

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$20.90

Add:

SOK1321
Slee Off Road

Slee 91-97 80 Series Heavy Duty Drag Link

The new Slee HD Drag Link is machined from 1.25" outside diameter .219" thick wall DOM tubing. The ends are tapped (left and right hand) to be a direct bolt on using the OE Rod Ends (can be purchased...

$229.00

Add:

SOF1028 now SOF1322
Slee Off Road

Slee 91-97 80 Series Heavy Duty Tie Rod

The Slee HD Tie Rod is machined from 1.25" outside diameter .219" thick wall DOM tubing. End's are tapped (left and right hand) to be a direct bolt on using the OE Rod Ends (can be purchased...

$241.99

Add:

SOR1253
Slee Off Road

Slee 91-97 Rear Panhard Rod

Panhard rods are used to locate the axle underneath the vehicle. When lifting a vehicle, the panhard rod effectively becomes 'shorter' and pulls the axle sideways. These rods will allow for...

$275.00

Add:

SOF1089 / W81701A
Slee Off Road

Slee 91-97 Rear Panhard Rod Bushing Kit

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$49.50

Add:

SOF1017
Slee Off Road

Slee 91-97 Rear Upper Control Arm Adjuster (Set of 2)

If the rear of the 80 Series Land Cruiser is lifted beyond 3"-4", the rear pinion angles might be changed enough to introduce vibrations. These joints can be installed in the rear upper control arms...

$253.00

Add:

SOF1248 / W61699A
Slee Off Road

Slee 91-97 Rear Upper Control Arm Hi-Flex Design Bushing Kit

These bushing kits are produced from a progressive long-chain polymer compound that incorporates polyurethane constituents. These bushings provide the softness needed for low vibration, noise and...

$126.50

Add:

SOF1011
Slee Off Road

Slee 93-97 Front Sway Bar Block (Pair)

Using shocks longer than stock, it is possible that the front drive shaft can come into contact with the front sway-bar under full droop. The eliminate this problem, we provide aluminum front...

$60.49

Add:

SPC-25460
Slee Off Road

Slee 96-02 4Runner Upper Control Arms (Pair)

$522.50

Add:

SOF1083
Slee Off Road

Slee 98-07 Rear Panhard Rod

Panhard rods are used to locate the axle underneath the vehicle. When lifting a vehicle, the panhard rod effectively becomes 'shorter' and pulls the axle sideways. These rods will allow for...

$275.00

Add:

SOK006 olSOF1047
Slee Off Road

Slee 98-07 UZJ100 and LX470 Front Diff Drop Kit

Slee 98-07 UZJ100 and LX470 Front Diff Drop Kit These do not have a current ETA>

$306.90

Add:

SOF1048
Slee Off Road

Slee Caster Plate Correction Kit for 4" Lift on 91-97

This is a bolt on kit (some welding recommended) that will correct the caster for 4" of lift on a 1991-97 Land Cruiser / LX450.

$152.90

Add:

SOF1046
Slee Off Road

Slee Front Bump Stop Pucks - 2"

Price is shown for a pair. Bump Stops serves two purposes. It stops the up-travel of the axle to prevent tire to body contact as well as over compression of the shocks. When installing a lift kit on...

$65.99

Add:

SOK1026
Slee Off Road

Slee Front Weld In Adjuster

You can purchase a complete adjustable panhard rod from us, or you can buy these DIY adjusters that can be used to modify the oem panhard rods. Installation requires cutting the rod and welding the...

$145.00

Add:

REC1042
Slee Off Road

Slee Off Road Jack Strap Tool

Attaches to; Sliders Certain ARB Front Bumpers Wheels Slee Off-Road bumper recovery points The supplied axle strap is used for preventing axle droop on a coil sprung vehicle when they're being jacked...

$130.90

Add:

REC1041
Slee Off Road

Slee Off Road Jack Strap Tool - Extra Strap

This item goes with the Jack Strap Tool - REC1042

$42.90

Add:

SOF1100L
Slee Off Road

Slee Off-Road Hi-Steer Arm Black Zinc Coated (Left)

Requires the use of an ABS style knuckle. We suggest using these steering arms in a double shear setup with a RHD Steering Arm. Sold as Left Only. Please call if you already have these in your...

$335.00

Add:

SOF1113
Slee Off Road

Slee Offset Aluminum Hawse Fairlead

Fits bumpers where original roller fairlead was re drilled to match winch line opening.

$92.40

Add:

SOF1008
Slee Off Road

Slee Rear Sway Bar Brackets 93-94 (Pair)

With suspension lifts installed, the rear sway-bar will be moved away from the frame. These 2" extended sway-bar brackets will allow you to lower the sway-bar mount point on the frame side of the...

$52.79

Add:

SOF1009
Slee Off Road

Slee Rear Sway Bar Brackets 96-97 (Pair)

With suspension lifts installed, the rear sway-bar will be moved away from the frame. These 2" extended sway-bar brackets will allow you to lower the sway-bar mount point on the frame side of the...

$56.10

Add:

SOK1016
Slee Off Road

Slee Rear Weld In Panhard Rod Adjuster

You can purchase a complete adjustable panhard rod from us, or you can buy these DIY adjusters that can be used to modify the oem panhard rods. Installation requires cutting the rod and welding the...

$145.00

Add:

SPC-25485
Slee Off Road