RSS Product Feed :: 08-14 200 Series/07-14 Tundra 4.88 Ratio Gear Package

08-14 200 Series/07-14 Tundra 4.88 Ratio Gear Package


Send us the price
2008-2014 Toyota Land Cruiser 200 Series
& 2007-2014 Tundra with 4.6 or 4.7 Litre
Nitro, 4.88 Ratio, Front & Rear Gear Package Kit

Front Differential: Toyota 9" Clamshell
Rear Differential: Toyota 9.5"
Gear Ratio: 4.88
Manufacturer: Nitro Gear & Axle
Warranty: 2 Years

Gear Package Kit Includes:
Nitro front ring & pinion
Nitro front Master Install Kit
Nitro rear ring & pinion
Nitro rear Master Install Kit
Front pinion pre-load spacer
Rear pinion pre-load spacer

Tech Note:
If your Toyota has OEM 3.90 or 4.10 gears a new carrier is required: 41311-35120 or RD121 from ARB. Both of these are listed on out site and are Sold Separately.

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you’ve fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting” - This is because the larger tires reduce your engine’s RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle’s drivetrain. This is especially important for today’s vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories. It’s a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

We at Nitro Gear & Axle realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- “Gear Packages” for many popular 4x4 applications. One part number. One price. One click away.

Nitro logo
Diffenential parts you can depend on.
Tundra Xoverland regear
  • 2 Year warranty

  • Nitro Rings & Pinions:
  • Manufactured in South Korea
  • 8620 Steel Gear Forgings
  • Precision Machining
  • CNC Triple-lapping
  • Heat Treatment
  • Rockwell Hardness Tested

  • Nitro Master Install Kits:
  • Koyo or OEM Carrier Bearings
  • Koyo or OEM Pinion Bearings
  • Pinion Nut if applicable
  • Pinion Seal
  • Crush Sleeve or Preload Shims or Solid Spacer
  • Carrier Shims if applicable
  • Gasket or Silicone
  • Loctite
  • Gear-marking Compound and Applicator Brush

For the Additional Options section there are several different types of Air Compressors listed and the Front and Rear ARB Air Locker to be able to add an Air Locker to your rig.

Air Compressors:

  • CKMA12
  • CKMP12
  • CKMTA12
  • CKMTP12
  • CKSA12


    Front Description Shaft Spline Ratio Part No.
    07-13 Tundra 8" IFS, 58mm Bearing 35 (1.38") 34 ALL RD151
    Rear Description Shaft Spline Ratio Part No.
    07-13 Tundra 4.7 Liter Engine 9.5" Dia. RG 35 (1.37") 32 ALL RD152
    07-13 Tundra 5.7 Liter Engine 10.5" Dia. RG 35 (1.37") 36 ALL RD146

    • Shipping Weight: 45lbs
    • Manufactured by: Nitro Gear & Axle

    Add to Cart:

    Ask a question

    This product was added to our catalog on Thursday 27 March, 2014.

  • Your IP Address is: