RSS Product Feed :: 1991-97 Land Cruiser / Lexus LX450 Slee Rear Bumper Combo

1991-97 Land Cruiser / Lexus LX450 Slee Rear Bumper Combo


Send us the price

1991-97 Land Cruiser / LX450
NEW Slee Rear Bumper with Dual Carriers

Slee bumper, tire carrier and ladder rack

Slee bumper, tire carrier and ladder rack
Exploded View

The Slee bumper and tire carrier is a bolt on installation that will fit vehicles from 1991 to 1997. No drilling or cutting is required on the frame. The bumper is formed from 3/16" laser cut steel.

The bumper is finished with final 60% gloss powder coat finish on top of a zinc primer. The pre-treatment includes baking to remove all oil, phosphate washing, sandblasting and then a powder coating is applied.

The bumper now features plate style carriers. The tire carrier can be used as an accessory mount if the tire mount is removed. The tire carrier accepts a 4 Gallon Rotopax can (optional hardware required). An optional Maxtrax Mount kit can be purchased if the user would like to store 2 x Maxtrax recovery boards on the carrier.

Bumper with Tire, 4 Gallon Rotopax and Hi-Lift Installed

Bumper with Tire, Maxtrax and Hi-Lift Installed

Bumper with Tire, Maxtrax and Hi-Lift Installed

Slee have designed a new proprietary latch system to close the carriers. A single latch secures both carriers shut. The latch is designed to be easily operated for both opening the closing.

The latch is designed to position the opening hand in a natural orientation to make opening and closing easy. The finger tab positions the U-bolt in the latching position to prevent finger pinching risks. The handle on the latch stays in the upright position to make it easier to close.

Stainless Steel safety pins keep the carriers closed in the unlikely event that the latch fails, or the user forgets to close the latch.

Single Proprietary Latch for both carriers

Latch in open position. T-handle Safery Pin

Easy to use finger tab to locate U-Bolt

Each carrier is held open with a gas strut that locks upon opening to ensure that the carriers does not accidentally close when vehicle is off-camber. This does require the user to unlock the carrier before closing. If users do not require the locking feature, the locking collar can be removed.

The gas struts also aid in closing the carrier and are located such that the carrier does not fly open as soon as the latch is released. Once the latch is released, the safety pin is pulled and the carrier is opened using the T-handle on the safety pin.

Locking Gas Strut

Swing-out carriers pivot on large 1.75" spindles with servicable roller tapered bearings to ensure smooth opening even with heavy loads on the the carriers. A propriety cap seals the hub and allows for easy removal and servicing of the bearings. A grease zerk allows for greasing of the bearings without removing the carriers.

Side tubes attached to the wings offer quarter panel protection.

Carrier pivots and side quarter panel protection

Bumper is supplied with LED license plate light and mount located on the ladder/accessory carrier. An optional receiver can be purchased to install through the bumper.

License plate mounting and optional receiver

A bolt on hi-lift mount is supplied that attach to the tire carrier. The tire mount can be removed should the user want to modify the swing-out for a custom application. The carrier has mutlitple holes for easy bolt on applications. The tire carrier is designed to accommodate up to a 37" tire, with adjustability on the width.

Tire Carrier Swing-Out with Hi-LIft mount Installed

The ladder / accessory swing-out also features a variety of mounting holes for customization. The swng-out accepts all our standard accessories like the Jerry Can Basket or Rotopax Mount.

Ladder / Accessory Swing-Out

This shows the forward frame mount of the bumper.

The bumper mounts to the frame using integrated and bolt on brackets. The rearmost bracket bolts to the bottom of the frame using existing holes in the frame. The bracket is also bolted through the frame in a horizontal direction.

Recovery points are 3/4" thick and are directly in line with the frame mounts to transfer any recovery forces directly to the frame.
Slee Bumper with Dual Carriers
Part: SOK1272
Weight - 165 lbs

Tire Carrier
Weight - 52 lbs

Accessory / Ladder Carrier
Weight - 39 lbs


  • Easy to use proprietary latch system
  • Single latch for both carriers
  • Safety Locking pins for keeping carriers closed
  • Gas assist struts that aid in opening and closing of carriers
  • Locking gas assist struts
  • Storage for 2 x Maxtrax (Optional Mount) or 4 Gallon Rotopax Can
  • Removable Hi-Lift jack holder
  • Plate style ladder to allow for easy accessory additions
  • Tire carrier can be used as a accessory carrier


  • 37" Tire capacity
  • Factory 2" receiver can be re-used
  • Optional 2" receivers available
  • LED License plate light
  • Fully supported wings for superior strength
  • 3/8" Plate steel wing supports
  • Integrated Recovery points that transfer load to frame
  • 3/4" Thick recovery points for increased side load strength
  • Rattle Free
  • Adjustable tire mount for different offset wheels

  • Shipping Weight: 400lbs
  • Manufactured by: Slee Off Road

Add to Cart:

Ask a question

This product was added to our catalog on Thursday 26 February, 2015.

Your IP Address is: